Course attendees:

1. Tool / Night pusher
2. Driller / Ass. Driller
3. HSE Field Engineer
4. Mechanic / Ass. Mech.
5. Electrician / Ass. Elect.

Aim:

1. Trainee will understand the body systems
2. Understand the principles of first-aid definitions and objectives.
3. The trainee will be able to define, determine causes, diagnose from signs and symptoms, and administer appropriate treatment.
4. He Will have the ability to use the Oxygen resuscitator and the first aid equipment
5. Be able to Check unconscious casualties and help the rig medic on carrying out resuscitation and cardiopulmonary resuscitation when needed.
6. Be able to deal with the fractures and treat wounds and bleeding.

Duration : 3-day Training @ 7 hrs per day.

Course Contents :

1. Body systems, Anatomy, physiology of the human body, respiratory, circulatory and central nervous systems.
2. Types of wounds and burns.
3. Fractures, their types, signs and symptoms. Immobilization treatment/ management ; practical fracture management.
4. Bleeding, Detecting internal bleeding; awareness of the causes, signs and symptoms. ,control.
5. Shocks, causes, diagnose from signs ,symptoms and treatment
6. Heat exhaustion and strokes, symptoms and treatment
7. Casualty evacuation procedures.
8. Steps to be taken in situations of poisoning by H2S and Carbon Monoxide.
9. Usage of first aid equipment.
10. Practice on the following
1. Wound bandaging.
2. Bleeding treatment.
3. Checking unconscious casualties ,set priorities and make observation,
4. Administeration of resuscitation, cardiopulmonary resuscitation and make assessments of expired air.
5. Burns treatment
6. Dealing with fractures

Course attendees:

1. Tool / Night pusher
2. Driller / Ass. Driller
3. HSE Field Engineer
4. Mechanic / Ass. Mech.
5. Electrician / Ass. Elect.

Aims :

1. Understand the fire fighting techniques and methods of fire control
2. Trainee will have the skills of leading the fire fighting and rescue teams
3. The trainee will have the ability to control / fight the fire safely.
4. He will be familiar with the use of the fire fighting equipment
5. Will have the ability to take command of a fire situation on the onshore rig and to improve his  fire fighting skills.

Duration : 2-days Training @ 7 hrs per day.

Course Contents :

1. Fire chemistry, combustion theory, sources of ignition and classification of fires.
2. Fire extinguishers, their classes, uses , ratings and extinguishing agents used
3. Fire fighting equipment / systems ,components and use .
4. Automatic fire alarm / detection and suppression systems
5. Demonstrate the use and application of foam in onshore fire situations .
6. Fire fighting personal protection equipment.
7. The fire hazards, their controls and fire prevention procedures.
8. SINO THARWA emergency procedures.
9. Fire control Planning
10. Fire case study
11. Demonstrate application of different types of the fire fighting techniques.
12. Hose running, nozzle handling techniques (dry and wet exercises) and valve isolation.
13. Practice on use of different types of fire fighting equipment
14. Practice with preset scenario on fighting fire in a building
15. Demonstrate casualty handling and rescue in fire situations using BA.

Course attendees:

1. Tool / Night pusher
2. Driller / Ass. Driller
3. HSE Field Engineer
4. Mechanic / Ass. Mech.
5. Electrician / Ass. Elect.

Course Objectives: At the end of the course, the attendee should be able to:

On Environment :

1. Understand Basic Environmental Management Concepts
2. Know Legal and International standards Requirements with regard to environment
3. Understand Key Sources of Environmental Pollution from E&P Activities, including the Environmental Impact of SINO THARWA Activities.

On Waste Management (according to Legal and International standards requirements):

1. Know what constitutes “waste” according to requirements for waste management activities.
2. Identify waste streams (2), categories (5) and types (many).
3. Know the Waste Management Hierarchy, including examples for each step in the Hierarchy.
4. Know Site Specific Roles and Responsibilities and approved techniques for waste collection, storage, transportation, treatment and disposal, inspections and audits according to SINO THARWA Waste Management procedure.
5. Understand waste classification and Implement  SINO THARWA Waste Management practices and guidelines, including “cradle to grave” hazardous waste tracking and documentation.

Training methodology :

The course should contain some examples and practices to enable the trainee efficiently and effectively to implement the waste management system (e.g., filling in hazardous waste transfer notes and monthly waste generation forms, etc.) as well as self-assessments/quizzes to help attendees determine retention of the course contents.

Duration: The course training should involve 3 days, 7 hours per day.

Course content

1. Sources and types of environmental pollutants
2. Approaches and techniques for pollution prevention
3. Major environmental impacts of the petroleum industry (air, water, land
4. Typical waste products generated by E&P activities, with specific focus on drilling activities
5. Relevant Egyptian Environmental Law and Executive Orders
   SINO THARWA Environmental Management requirements (e.g., Waste Management Manual, etc.)
6. SINO THARWA / OPCO's  responsibilities for environmental management, including waste management
7. Relevant Aspects of Waste Management as per Legal / standards  requirements:
1. Definitions
2. Waste streams, categories and types and their management requirements
3. Waste collection, segregation and labeling
4. Waste storage, with emphasis on hazardous waste storage requirements
5. Waste transportation
6. Waste treatment options
7. Waste disposal options
8. Waste management system performance reporting
9. Waste management system inspection and audits
10. “Cradle to Grave” hazardous waste tracking and documentation
11. Site roles and responsibilities for waste management activities
12. Individual roles and responsibilities for waste management activities
13. Environmental incident reporting and response
14. Wastes measurement and monitoring
15. Waste sampling & Analysis

Course attendees:

1. Tool pushers
2. Night pushers
3. Mechanic /Ass.
4. Electrician / Ass.
5. HSE Field Engineers

Course Objectives:

To provide an overview of hazardous exposures in the workplace, related Occupational health risks, and methods of control to eliminate / reduce such exposures.

At the end of the course, the attendee should be able to:

1. Understand the mechanism and routes of contamination linked to occupational disease.
2. Identify the Occupational health hazards, Asses their risk.
3. Know the effect and limits of exposure to the different OH hazards
4. Understand the means of OH hazards control 
5. Understand the principles of food hygiene
6. Understand the principles of ergonomics

Training methodology:

The course should include exercises, case studies and demonstrations.

Duration: The course training should involve 2 days, 7 hours per day.

Course content:

1. Introduction to Occupational Health & Hygiene
2. Definition
3. Legal aspects of OH and work laws
4. Occupational health hazards
1. Chemicals
2. Heat stress
3. Radiation
4. Noise
5. Insufficient ventilation /space
6. Insufficient lighting
7. Contaminated Indoor Air
8. Biological
9. Food /water contamination
5. Types & causes of OH Diseases
6. Types of contaminants, their Properties and routes of entry
7. Means of identifying toxic and hazardous substances.
8. Exposure limits and effect
9. Control of substances hazardous to health (safe handling)
10. OH hazards Control in accordance with International standards
11. MSDS
12. Noise and vibration:
1. Human hearing mechanism.
2. Level and frequencies
3. Noise measurement, evaluation and control
13. Lighting:
1. Necessity of adequate lighting.
2. Lighting terms and units of measurement.
3. Effects of poor lighting on personnel.
4. Monitoring techniques and means of providing adequate lighting.
14. Food Hygiene
15. Ergonomics principles
16. Personal protective equipment:
1. Ingestion
2. Absorption
3. Others

Course attendees:

1. Tool / Night pusher
2. HSE Field Engineer

Course Objectives: At the end of the course, the attendee should be able to:

1. Understand the Structure of the Emergency response plan
2. Prepare Emergency Plan
3. Understand SINO THARWA emergency Procedures and systems
4. Manage and cope with emergency situations
5. Make Decision in an emergency situations
6. Review the Emergency plan
7. Understand Legislation and Government liaison

Training methodology:

The course should include practices on Crisis Management based on pre-set scenarios.

Duration:

The course training should involve 3 days, 7 hours per day

Course content:

1. Case history of relevant major Accidents/Incidents
2. Emergency Response (ER):
   1. The Legislatio
   2. The Aims
3. Site emergencies:
   1. The objectives
   2. Scope
4. Handling the Emergency (Risk Assessment)
5. The Emergency Response organization & Interfaces
6. Emergency teams ,Roles & Responsibilities
7. The Emergency Response Procedure (SINO THARWA)
8. Types of Emergencies
9. Emergency Equipment & Resources
10. The Communication in the Emergency Response (The ER communication procedure)
11. Recording the events and the preparation of the report
12. Sess in The Emergency Response and the Human behavior in Emergency
13. Syndicates Exercises & Table Top exercises

Note: Attendees to this course should have preferably attended the following courses:

1. Advanced fire fighting
2. Breathing Apparatus
3. Environment & waste managment
4. Hazardous material/MSDS
5. Risk Managment
6. First Aid

The course is intended for: 

1. Electrician
2. HSE Field Engineer
3. Assistant Electrician

Duration: Two Days

Aim: The attendee will be able to manage and control the electric equipment hazards.

Objectives: By the end of the course delegates will be able to

1. Know the Hazardous area classification on the drilling rigs
2. List the apparatus / temperature group classes
3. Compare between the different standards of the groups
4. Understand the grounding methods & ground fault protection
5. Know how to select the electric equipment for the hazardous areas

Content:

1. Introduction
2. Definitions
3. Effects of Electricity on the Human Body
4. Grounding
5. Ground Fault Protection
6. Flammable materials
7. Area Classification, basics & definition
8. Hazardous area classification on the drilling rigs “Enclosed and adjacent areas “
9. Ventilation & indoor areas
10. Apparatus Groups and Temperature classes.
11. Types of protection “Explosion proof, intrinsically safe, etc…”
12. Standards for Equipment in Hazardous Locations
13. Comparison between different standards for atmosphere and apparatus groups
14. Low voltage equipment safety
15. Selection of equipment

Course attendees:

1. Tool / Night pusher
2. HSE Field Engineer

Aim :This document aims to describe a course which will:

1. Give the attendees the skills required for Team Leader accident investigations. This includes being able to lead an investigation, prepare an incident report and present the results of the investigation.
2. Provide the attendee with complete knowledge, skills and experience in the practical application of modern accident investigation and analysis techniques.

Course Objectives: At the end of the course, the attendee should be able to:

1. Understand the role of accident investigation and analysis
2. Detail the accident investigation stages and activity phases
3. Understand latent, active errors and pre-conditions for accidents /incidents
4. Interview witnesses
5. Explain the causes of accidents using accidents causation matrix
6. Construct a fault & cause tree analysis charts
7. Compile accident report and remedial action plan
8. Understand SMART actions
9. Understand the accident and investigation section of HSE Safety Manual.

Training methodology:

The course should contain a large group of exercises and case studies to enable the trainee efficiently and effectively managing the accident investigation and analysis.

Duration: The course training should involve 3 days, 7 hours per day

Instructor:

The training should be conducted by a competent instructor (consultant(s) with extensive experience in the course subject).

Course content:

1. Definitions
2. Activity phases and stages of accident investigation
3. Witnesses interview techniques
4. Inspection of the accident location
5. Sketches and photography 
6. Systems investigation
7. Equipment and material examination
8. Fire investigation
9. Facts collection and gathering evidences
10. Human errors
11. Dynamics of events
12. Accidents causation model
13. Legal aspects
14. Analytical techniques
15. Accident reports, types and examples.
16. Prepare SMART actions, presentation material and HSE Alerts
17. Case studies

Course attendees:

1. Tool pushers
2. Night pushers
3. Driller
4. Assistant Driller
5. Mechanic /Ass.
6. Electrician / Ass.
7. HSE Field Engineers

Duration: two days

Aim:  Give the attendees the skills required to perform a qualitative risk
Assessment and determine measures to reduce risk as low as reasonably
Practical

Objectives: By the end of the course delegates will be familiar with:

1. Definitions of hazard, risk
2. Techniques for measuring and evaluation risks
3. Techniques of hazard identification
4. How to carry out qualitative risk assessment
5. Understand Sino Tharwa risk assessment Procedures

Content:

1. Introduction
2. Definitions
3. Major hazards associated with the drilling rigs
4. Hazards identification techniques
5. Safety barriers (Engineering and Administrative controls)
6. Recovery procedures
7. Risk management
8. Risk assessment techniques.
9. Risk potential matrix
10. Sino Tharwa Risk assessment procedures (include forms)
11. How to carry out risk assessment
12. Case study

Course attendees:

1. All Supervisors
2. Field HSE Engineers (Train the trainer)

Course Objectives:

At the end of the course, the attendee should :

1. Understand the different types of hazards
2. Able to identify the hazards
3. Know the methods of Controlling the hazards

Duration: The course training should involve 1 day

Course content :

1. Definitions
2. Types and sources of hazards
1. Power sources
2. Machinery
3. Materials handling
4. Confined space
5. Construction and maintenance
3. The practical tools of hazards identification
1. Job safety analysis
2. Work place layout and design
3. Work site inspection
4. Review of old accidents
5. Materials safety data sheets
6. HSE survey check lists
7. Hazards register
8. Past experiences
4. Methods of hazards controls
1. Engineering controls
2. Work practices
3. Administrative controls
4. Personal protective equipment

The course is intended for :

1. Tool pushers
2. Night pushers
3. Driller
4. Assistant Driller
5. Mechanic /Ass.
6. Electrician / Ass.
7. HSE Field Engineers

Course Objectives :

 At the end of the course, the attendee will

1. Understand Sino Tharwa lifting procedures  
2. Understand the Rigging and slinging techniques
3. Be Able to select the proper sling and the safe rigging method
4. Have the ability to calculate and recognize the SWL of the sling and plan for the lifting job.

Duration: two days

Content:

1. Introduction.
2. Definitions
3. Types of slings
4. Wire rope construction
5. Safe rigging practices
6. Load stability
7. Slinging Applications
8. Wire rope handling
9. General safety
10. Slings selection
11. Loads on blocks
12. Wear & abuse
13. Storage procedures
14. Inspection of slings and loose gear
15. Wire replacement
16. Safe lifting operation
17. Banks man
18. Shackles & Hooks

The course is intended for :

1. Tool pushers
2. Night pushers
3. Driller
4. Assistant Driller
5. Mechanic /Asst.
6. Electrician / Asst.
7. HSE Field Engineers

Course Objectives :

 At the end of the course, the attendee will

1. Understand SinoTharwa  permit to work procedures
2. Understand the isolation and lock out procedures
3. Be Able to manage and control all types of PTW
4. Have the ability to determine the safety precautions and the controls needed to manage the critical jobs safely.

Duration: Two days

Content:

1. Introduction.
2. What is the PTW
3. PTW Objectives
4. Definitions
5. When we need work permit
6. Jobs require PTW
7. Sino Tharwa PTW procedures
8. Types of PTW
9. Hot
10. Cold
11. Entry to confined space
12. Mechanical / Electric. Isolation
13. Methods of isolating and Eliminating the hazards
14. Electric isolation and lock out procedures
15. PTW issue procedures
16. Responsibilities
17. Practice on managing and control the PTW
18. Authorization for PTW
19. Case studies for the different types of PTW